• HP-2® / M39000*

    The HP-2 is the number one selling hand rivet tool in the industry. Known and trusted for durability, quality and performance, the HP-2 is often copied but never duplicated. Its square shoulder fulcrum pin of cold-formed heat-treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools. Other quality features include: precision die-cast, high-strength aluminum alloy body; drop-forged carbon steel upper handle; and thick, cushion-molded vinyl grips for comfort. The HP-2 sets up to 3/16″ steel rivets and comes with four mounted nosepieces (3/32″, 1/8″, 5/32″ and 3/16″) and a service wrench. Refer to the Hand Rivet Tool Capacity Chart on page 19 for specific capabilities. Weight: 1.2 lbs.

  • HP-3® / M39002

    This hand rivet tool offers long, ergonomically designed handles to increase leverage. The tool is spring-loaded to secure the rivet in the nosepiece while the tool is in any position. The HP-3 offers powerful riveting capacity with 4 standard nosepieces to set 3/32″, 1/8″ and 5/32″ in all alloys and up to 3/16″ in steel. It features a dropforged steel handle with heat-treated aluminum body with steel insert, high quality powder coated finish, special alloy steel fulcrum pin with anti-wearing design and durable jaws and jaw case. Weight: 1.2 lbs

  • Klik-Turn™ SP-1 / M39005

    The SP-1 swivel head hand-held rivet tool features a patented positive-ratchet locking feature which will allow the swivel head section of the tool to turn 360° and hold in place in any of the forty-plus positions. The high-strength steel body and cast aluminum head complement this innovative design in a swivel head
    riveting tool. The SP-1 also includes built-in threaded nosepiece storage holes and a service wrench. The SP-1 sets up to 3/16″ steel rivets. Weight: 1.2 lbs.

  • 200 Kit™ / M39001*

    The deluxe hand riveter kit includes the HP-2 and 200 assorted Klik-Fast rivets: 50 each SB4-2, SB4-4, AB4-2A; 25 each SC4-4, AB6-2. The molded plastic case houses and protects the tool and rivets. Weight: 4 lbs.

    Stainless Steel Kit / M39003*

    This kit is the same as our M39001, but contains 200 assorted Klik-Fast stainless steel rivets: 40 each SSB4-2S, SSB4-3S, SSB4-4S, SSBL4-2S, SSBL4-4S. Weight: 4 lbs.

  • Big Daddy® / M39031*

    The Big Daddy is the most versatile and powerful Marson brand hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra long handles provide excellent leverage and permit working a foot beyond natural reach. Other features include a patented bearing design, self-adjusting two-piece jaws and single-unit body construction with a steel insert to provide stronger threads for the nosepieces included. In addition, the Big Daddy features a double-gear reduction system which easily sets from 1/8″ to 1/4″ diameter Klik-Fast rivets in all alloys, including 1/4″ Klik-Split ® and 3/16″ and 1/4″ KlikLock™* rivets. Additionally, a one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The Big Daddy model #M39031 comes with 5/32″, 3/16″ and 1/4″ nosepieces, which are stored in the body. Weight: 3.75 lbs

  • Big Daddy / M39035*

    This is the same tool as M39010, but comes with M39009 attached, extending the tool’s reach by an additional 2 1/2″. Weight: 4 lb

    Big Daddy / M39010*

    This is the same tool as M39031, but comes with 3/16″, 1/4″ and special 1/4″ Klik-Split rivet nosepieces. Weight: 3.75 lbs.

    Big Daddy II / M39032*

    With all the features of the Big Daddy, Big Daddy II includes a built-in mandrel collection receptacle; just remove the end cap on the bottom handle to discard the spent mandrels.

  • Big Daddy Conversion Kit 3 Jaw Set
    Up / M96050

    Converting to a three-jaw set adds additional gripping power and extends jaw life.

    Big Daddy Extended Nosepiece Kit / M39009

    Install kit to add an additional 2-1/2″ to any Big Daddy tool. Weight: .25 lb.

Hand Rivet Tool Capacity Chart

Automatic Tools

These next generation, professional series air / hydraulic riveters are designed to be lightweight and well-balanced. Both are engineered to maximize stroke and pull force with a 3-jaw set. For added convenience, you can direct connect or use the attached swivel. Each tool is supplied with nosepieces to set rivets in all alloys and comes complete with adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws and a removable swivel air connection line with an air OFF / ON valve built in. An adjustable vacuum system allows you to control the force of air needed to hold the rivet in place, or you may operate with the vacuum system turned off. Recommended air pressure is 70-95 PSI

  • MP-3V / M39045

    Stroke: 3/4″
    Pulling Force: 1,800 lbs.
    Capacity: 3/32″ – 3/16″, all alloys
    Weight: 2.9 lbs

  • MP-4V / M39048

    Stroke: 1″
    Pulling Force: 3,420 lbs.
    Capacity: 5/32″ – 1/4″, all alloys,
    1/4″ monobolt nosepiece included
    Weight: 3.7 lbs.

Each of these proven, professional tools features a one-piece molded frame and front swivel air inlet for maximum operator comfort and durability. An external vacuum adjustment offers convenient air flow control for rivet placement and mandrel disposal. This allows the operator to install rivets in any orientation using one hand, and freeing up the other for assembly. Spent mandrels are conveniently collected in the bottle for disposal, encouraging a safer, clean work environment. Tools come complete with oil, replacement jaws and nosepieces. Recommended air pressure: 85-95 psi.

  • 302-E / M39062

    Stroke: .812″
    Pulling Force: 2,000 lbs.
    Capacity: 3/32″ – 3/16″ diameter in all
    alloys and up to 1/4″ in aluminum / steel
    Weight: 4 lbs.

  • 304-E / M39064

    Stroke: 1″
    Pulling Force: 4,200 lbs.
    Capacity: 3/16″ to 1/4″
    in all alloys, including structural rivets
    Also included are 3/16″ and 1/4″
    Monobolt® and Magna-lok
    Weight: 5.5 lbs