Part No: TP888-1 (With 1″ “C” yoke, 3.4 lbs. – No Upper Set Hole)
    Part No: TP888-2 (With 2″ “C” yoke, 3.85 lbs.)
    Part No: TP888-3 (With 3″ “C” yoke, 4.4 lbs.)
    Part No: TP888-4 (With 2″ & 3″ “C” yokes, 5.4 lbs.)
    Part No: TP888-5 (With 1″, 2″, & 3″ “C” yoke, 6.5 lbs.)
    Part No: TP888-6 (With 5″ “C” yoke, 8 lbs.)
    Part No: TP888-7 (With 1″, 2″, 3″ & 5″ “C” yoke, 8.5 lbs.)
    This versatile tool is available individually as a 1″, 2″, 3″ or 5″ model or as combination
    units. By simply removing 3 hardened pins you can change the yoke to match your riveting or dimpling application. Longer, redesigned handle for increased force and ease of
    • Capable of forces in excess of 3,600 lbs.
    • .187 shank rivet set holes
    • Comes with 4 Universal AN470 rivet sets and 2 flush sets (TP116A), .187 shank
    • Adjustable set holder
    • 3/32″ to 3/16″ rivet capacity
    • Has removable “C” yoke
    • 15.2″ length
    • Made from ductile steel
    • Storage pouch included
    • Made in the U.S.A


    2.5 lbs.
    A basic tool for all riveting operations. It has a unique adjustable rivet set holder which can be
    adjusted for various rivet lengths. All parts are heat treated.
    • Heavy duty
    • .187 shank rivet set holes
    • Comes with 4 Universal AN470 rivet sets and 2 flush sets (TP116A)
    • 3/32″ to 3/16″ rivet capacity
    • 1-1/2″ reach x 1-1/2″ gap
    • 14″ length
    • Storage pouch included

These silent alligator-type compression riveters are excellent for many assembly operations – used in aircraft, automotive, truck, bus components, boats, metal furniture, toys, electronic chassis and appliance assembly.

• One-man operation increases productivity
• Rolling cam and wedge assembly greatly multiplies compression
force of piston
• “Squeeze” action permits easy control, exceptional accuracy and

• High joint integrity independent of operator skill level
• Speed of squeeze riveter can be controlled by throttle
• Swivel air inlet aids maneuverability
• Tandem cylinder doubles compression force available from tool
• Develops full squeezing force with only 90 p.s.i. air pressure
• One piece bearing for long life
• Yellow“Sure Grip” finish for positive handling
• Cast alloy steel lever positioned for user comfort
• Made in the U.S.A.
• CE certified

* NOTE: If you require .250 set holder hole, specify “S” (example: US114A-S). If you require .5mm set holder holes, specify “mm” (example: US114A-MM). Patent Pending. Tool provided with 35599 Guard Standard.
†Rivet capacities are for reference only, based on mild tensile fastener grades. Actual compression trials on sample rivets will provide absolute force requirements. Provide us with your rivet samples for
testing at no additional charge.